|
|
| Edifier S2.1D 2.1
Multimedia Speaker |
|
|
| The Edifier S2.1D is essentially the base 2.1 system, plus a
high quality Digital Input. The built in
96KHz/24BIT audio decoder accepts all incoming
S/PDIF digital audio signals. As with nearly
all Edifier systems, MDF wood enclosures
are used for the subwoofer and satellites.
The classic Band-Pass design subwoofer uses
a 6.5" professional design driver,
and to compliment each satellite, a 3"
mid-range driver, and 3/4" cloth dome
tweeter are utilized. The S 2.1 also utilizes
a High Power output amplifier, and a Microcomputer
controlled digital volume IC. Designed by
Edifier's Sound Engineers for all serious
enthusiasts, the S series 2.1D delivers
superb realism for all S/PDIF Digital Input
Sources available. |
|
|
|
|
|
|
Specifications
|
- Power Output:
Satellite Speaker: RMS 20Wx2(@ fo=1kHz, 10% THD, 2 channels loaded );
Woofer: RMS 40W (@ fo=60Hz, 10% THD, single channel loaded )
- THD+N (Amplifier): <=0.5% (satellite, @ PO=3W )
- Signal-to-Noise Rate (Amplifier): >=85dB(A Weighted)
- Input Impedance: 22K Ohms
- Input Sensitive: 450mv
- Frequency Response: 36-20k Hz
- Input Port: stereo RCA Line-in, S/PDIF Coaxial RCA input, S/PDIF Optical input
- Controller: Volume, Super Bass, Treble, Loudness, Balance
- Woofer unit Impedance: 8 Ohms
- Woofer driver unit: 6.5 inch(D166mm), magnetically shielded
- Satellite Speaker unit Impedance: 4 Ohms
- Satellite driver unit: 3 inch (D90mm) paper cone, magnetically Shielded;3/4 inch cloth dome tweeter, magnetically Shielded
- Dimensions:
Subwoofer: 350(W) x 190(H) x 292(D)mm;
Satellite Speaker: 105(W) x 192(H) x 100(D)mm
- Gross Weight: about 12Kg
- Power Requirement:
220V-240V ~ , 50/60Hz (for Model European/China/Korea/South America, etc.);
100V-120V ~, 50/60Hz (for Model USA/Canada/Japan )
- MX Power Consumption: 100W
|
|
|
|
|
|
