Frequently Asked Questions
No, but we do have other models that have Bluetooth such as the R1700BT, R2000DB and S1000DB
They should work fine with one, yes.
These are designed to work without subwoofers. The bass driver units on these are 4" each, more than sufficient for most purposes.
Yes, whichever source is on will be playing.
The R1700BT Speakers do not come with an input to plug your headphones in. You may be able to plug your headphones in through an RCA to female cable, however, this is not recommended and you should rather plug your headphones in at the source.
Yes there are 2 sets of RCA inputs. You will need an extra piece of cable.
They do, yes.
It's comes in a pair
Hissing may occur when the audio input source connector is not properly insulated or when there's interference near the connection. Otherwise these should stay nearly silent in terms of ambient noise -- even at the highest volume.
You can do it through the RCA pc connections, as well as optical and coaxial digital connect.
One is self powered, and the other is passive (powered by the other speaker).
They have powered subwoofer, and yes, they need to be plugged in.
They do not. There is a switch that must be manually flipped on the back of the unit.
Yes. All Edifier speakers are magnetically shielded and designed to work near any monitors or TV units.
146mm x 234mm x 196mm (WxHxD) or about 6 x 9 x 8 inches
Yes they do. We designed them to look great with the grill on or off.
No, only one speaker has power plug and the other speaker draws power from the first one
2 speakers and 2 mesh covers, speaker wire, 3.5mm to RCA cable, RCA to RCA cable, remote, user manual
You do not need a receiver for these speakers. These are active speakers that has built-in amplifiers. You can connect your audio source (TV, DVD player, computer, phone etc) to these speakers directly.
The R1280T uses standard Australian plugs. And comes with a 110 - 240v power supply.
Simply connect using the included RCA to RCA cable. White to white port and red to red port.
Yes, they should work just fine.
You should be able to leave them on for very long periods with no harmful effects, although you may see your electric bill go up.
If your TV has an AUX out then you can connect them to your TV.
W x H x D measures 154mm x 254mm x 214mm or 6.1x8.4x9.9 inches. Keep in mind you need some extra space behind it for connectors
The speaker wire included is 8ft long, so 5 feet is no problem at all.
The connecting cable included is 16-feet/5meters long.
These speakers have a total of 33 watts. The tweeter outputs 15 watts. The mid-lowrange driver outputs a total of 18 watts RMS power output.
A DAC is not mandatory because modern computers are usually equipped with great sound chips/cards. Using a DAC for sound enhancement is more of a personal preference.
You can keep these speakers plugged into your TV and switch the input setting with the wireless remote. There is an LED light on the speakers so you know which input you are set to.
The speakers come with a 3.5mm cable that should work with smart phones, yes.