Multifunctional speakers for your everyday needs
Frequently Asked Questions
They should work fine with one, yes.
These are designed to work without subwoofers. The bass driver units on these are 4" each, more than sufficient for most purposes.
The R1700BT Speakers do not come with an input to plug your headphones in. You may be able to plug your headphones in through an RCA to female cable, however, this is not recommended and you should rather plug your headphones in at the source.
Yes there are 2 sets of RCA inputs. You will need an extra piece of cable.
Hissing may occur when the audio input source connector is not properly insulated or when there's interference near the connection. Otherwise these should stay nearly silent in terms of ambient noise -- even at the highest volume.
They have powered subwoofer, and yes, they need to be plugged in.
No, only one speaker has power plug and the other speaker draws power from the first one
You do not need a receiver for these speakers. These are active speakers that has built-in amplifiers. You can connect your audio source (TV, DVD player, computer, phone etc) to these speakers directly.
Yes, they should work just fine.
W x H x D measures 154mm x 254mm x 214mm or 6.1x8.4x9.9 inches. Keep in mind you need some extra space behind it for connectors
The connecting cable included is 16-feet/5meters long.
These speakers have a total of 33 watts. The tweeter outputs 15 watts. The mid-lowrange driver outputs a total of 18 watts RMS power output.
A DAC is not mandatory because modern computers are usually equipped with great sound chips/cards. Using a DAC for sound enhancement is more of a personal preference.
You can keep these speakers plugged into your TV and switch the input setting with the wireless remote. There is an LED light on the speakers so you know which input you are set to.
In order to protect the speakers (and your ears) from a loud volume surge, they utilize a volume remember setting that powers on at anywhere from 20 to 60% lower volume, depending on how loud they were when they were last switched off.
Remotes are available for purchase on Edifier’s official website. Visit the Edifier site that is specific to your region and then click the “Shop” at the top right. On the next page, click on “Accessories” located in the left sidebar. The accessories page should have a listing for the remote.
Our 2.0 speakers are not intended for use with a sub, and they do not have a sub out. There is, however, a workaround that can help depending on what sub you have. If your sub has an adjustable crossover and RCA inputs, you can use an RCA splitter for each of the inputs and then connect the other splitter cables to the sub inputs. This will only work with Aux-in and not with Bluetooth, or S/PDIF.
First, check if your device requires a driver update. If not, then this is often an issue with the operating system rather than the products themselves. We suggest contacting Windows support for help. The phone number for their US support line is 1 (800) 642 7676. You can also visit their help page, and click on “Contact Support” under the “Get Help” app button: https://support.microsoft.com/en-us/contactus/ For a full international list of Microsoft support numbers, please visit this page: https://support.microsoft.com/en-us/help/4051701/global-customer-service-phone-numbers
The S1000DB is one of the top of the line bookshelf 2.0 models from Edifier. It will have a better sound than other non S series or Airpulse models.
Still have questions?
Send us a support ticket. We will get back to you as soon as possible
I¡Servicio disponible en Español! (Service is available in Spanish)