Selecteer kleur: Wood
Symmetric Design Dual Main Speakers
For the first time, the S3000Pro introduces dual main speakers that features an acoustic crossover management and power simplifier system. With the independent left and right balanced design, the speakers are able to achieve a uniquely balanced sound.
The S3000Pro features true wireless innovations thanks to KLEERNET technology, which supports professional-grade wireless transmission that frees users from the shackles of wires so that the speakers can be freely placed anywhere while still maintaining its high-fidelity wireless sound quality.
As Edifier’s newest flagship product, the S3000Pro has upgraded its driver unit and passed the HiRes standard in order to offer an extremely immersive sound experience for its users.
All Digital Audio Processing
In the digital HD generation, high-fidelity all-digital audio processing tech has become the mainstream audio solution. The digital interface has a high bit stream processing capability of up to 24Bit/192kHz, which supports the transmission of PCM and SPDIF lossless formatted music files.
High-level digital-to-analog analog-to-digital conversion chip
The S3000Pro’s digital interface uses a higher specification DAC chip, PCM5242, which supports a maximum input sampling rate of 32Bit/382kHz with a signal-to-noise ratio of up to 114dB. This allows for a digital signal transmission with almost zero loss.
XMOS Professional Audio Processing
For audiophiles, XMOS’ xCore multicore processor has always been regarded as a leading solution for high-end, high-fidelity audio. The S3000Pro’s built-in 16-core chipset, u216, has powerful computing capabilities of up to 2000 MIPS and unique internal architecture of parallel signal processing, which makes it naturally suitable for processing a playback of time-sensitive signals such as audio.
Both speakers on the S3000Pro are equipped with a TI professional audio processing chip, TLV320A-IC3268, for independent electronic frequency division and management of the treble, mid and bass tones, and can control frequency allocation.
Bluetooth 5.0 Module
The S3000Pro is complete with the Qualcomm CSR8675 Bluetooth 5.0 chipset, with a built-in AptX DH decoder, which supports the 24bit/96KHz transmission to provide lossless music.
Total Output Power (RMS)
L/R (treble): 15W+15W
L/R (mid-range bass): 50W + 50W
45Hz - 40KHz
Line In 1, Line In 2, Optical, Coaxial, Bluetooth
Line In 1: 800 ± 50mV;
Line In 2: 600 ± 50mV;
Optical / Coaxial: 350 ± 50mFFS;
Bluetooth: 450 ± 50mFFS
Please check the following points: 1) The power indicator light should be ON 2) Try to turn up the volume 3) Make sure the audio cables are correctly connected 4) Make sure you set the input correctly on the speakers 5) The audio source should deliver a signal output
Please check the below points: 1) Make sure your speaker is switched to Bluetooth mode. Disconnect any other devices from your speakers 2) Ensure the transmission range is within 10 meters. 3) Try another Bluetooth device for connection
You can turn on the Edifier bookshelf speakers by one of the following methods: 1) Connect the main power of your speakers 2) Switch on the wall outlet of your speakers