Wall Mountable Speaker for TV

Bluetooth V4.1

IR remote control

Ideal for large format TVs

Digital signal processing (DSP)

HDMI input with ARC (audio return channel)

8" (210mm) MDF enclosed wireless subwoofer

Select Color: Silver

Specification

Signal-to-Noise Rate:

≥ 85dB (A)

Noise Level:

≤ 25dB (A)

Total Output Power (RMS):

R/L (Treble): 12W + 12W
R/L (Mid-range): 30W + 30W
SW: 70W

Driver:

Bass unit: 8 inch (210mm)
Mid-range unit: 2 ¾ inch (70mm)
Tweeter unit: inch (25mm)

Frequency Response:

45Hz – 20kHz

Audio Inputs:

AUX, Coaxial, HDMI, Line in, Optical

lnput Sensitivity:

AUX: R/L: 400±50mV, SW:320±20mV
Bluetooth: R/L: 450±50mFFs; SW:370±20mFFs
Line in: R/L: 600±50mV; SW:500±20mV
OPT/COX: R/L: 350±50mFFs; SW:250±20mFFs

Bluetooth:

V4.1

FAQ

Why can’t I hear any sound?

Please check the following points: 1) The power indicator light should be ON 2) Try to turn up the volume 3) Make sure the audio cables are correctly connected 4) Make sure you set the input correctly on the speakers 5) The audio source should deliver a signal output

Why can’t I connect my speakers via Bluetooth?

Please check the below points: 1) Make sure your Edifier speakers are switched to Bluetooth mode. Disconnect any other devices from your speakers 2) Ensure the transmission range is within 10 meters. 3) Try another Bluetooth device for connection

Why can’t I turn on the speakers?

You can turn on the speakers by one of the following methods: 1) Connect the main power of your speakers 2) Switch on the wall outlet of your speakers

Does this soundbar come with dts and dolby decoders?

No. Please try PCM when connecting the soundbar via optical options.

What is the power output of this soundbar?

RMS 16W×2 (Treble)+19 W×2 (Mid-range and bass)

Can I connect this soundbar to other Edifier bookshelf speakers?

No.

Support Product and technical support