Válasszon színt: Silver
Powerful Digital Amplifier
The B8 speaker uses a total of three Texas Instruments digital power amplifier chips TAS5754M, the continuous undistorted power of the speaker reaches up to 12W×2 for high pitch, 30W×2 for medium and low pitch, and 70W for the subwoofer.
Elevate Your TV Sound
25mm silk treble unit and 2 3/4" (70mm) aluminum diaphragm mid-range unit offer an outstanding dynamic response and the mid-low frequency performance is strong and impressive.
Modern and Stylish Look
Metal mesh cover, classic triangular design, and rounded curve reveal a fashion breath, combined with any large flat-panel TVs above 55 inches.
Total Output Power (RMS)
R/L (Treble): 12W + 12W
R/L (Mid-range): 30W + 30W
Bass unit: 8 inch (210mm)
Mid-range unit: 2 ¾ inch (70mm)
Tweeter unit: inch (25mm)
45Hz – 20kHz
≥ 85dB (A)
AUX, Coaxial, HDMI, Line in, Optical
AUX: R/L: 400±50mV, SW:320±20mV
Bluetooth: R/L: 450±50mFFs; SW:370±20mFFs
Line in: R/L: 600±50mV; SW:500±20mV
OPT/COX: R/L: 350±50mFFs; SW:250±20mFFs
≤ 25dB (A)
Please check the following points: 1) The power indicator light should be ON 2) Try to turn up the volume 3) Make sure the audio cables are correctly connected 4) Make sure you set the input correctly on the speakers 5) The audio source should deliver a signal output
Please check the below points: 1) Make sure your Edifier speakers are switched to Bluetooth mode. Disconnect any other devices from your speakers 2) Ensure the transmission range is within 10 meters. 3) Try another Bluetooth device for connection
You can turn on the speakers by one of the following methods: 1) Connect the main power of your speakers 2) Switch on the wall outlet of your speakers
No. Please try PCM when connecting the soundbar via optical options.
RMS 16W×2 (Treble)+19 W×2 (Mid-range and bass)