แนะนำ

W820NB

W240TN

MS50A

การค้นหายอดนิยม

W820NB

NeoBuds Pro

S3

S1000W

MR3

Powered Studio Monitor Speakers

เลือกสี: White

MR3

ซื้อเลย
กลับไปยัง ลำโพง
ภาพรวม
ข้อกำหนด
คำถามที่พบบ่อย
การสนับสนุน
ซื้อเลย

Designed for Honest Reproduction

Well-designed acoustic architecture, dedicated tuning, and meticulous craftsmanship all contribute to the accurate reproduction of audio details and nuances. Ideally suited for home studios, video editing, and daily listening.

Flat Frequency Response

EDlFlER MR3 features a flat response covering a wide frequency range from 52Hz to 40kHz. Accordingly, it can reproduce neutral and transparent sound.

 

Specifically, the dimpled tweeter waveguide brings a flatter and more extended high-frequency response, leads to clearer and more accurate sound reproduction, and ensures consistent sound quality across a wider listening area.

High Resolution Audio

Both the analog audio front end and the Class-D audio amplifier from Texas Instruments feature special configurations to work at 24bit/96kHz, guaranteeing bit-perfect audio conversion and amplification.

Acoustic Room Compensation

Rear knobs and the EDlFlER ConneX app provide multiple settings for acoustic room compensation, allowing you to adapt to different room modes and achieve the optimal listening experience.

 

"High" knob: Cuts or boosts frequencies above 10kHz by ± 6dB

"Low" knob: Cuts or boosts frequencies around 125Hz by ± 6dB

 

Low Cutoff: Attenuates specified low frequencies to suit the shape and size of your room.

Acoustic Space: Compensates for mid and bass boosts to suit speaker placement.

Desktop Control: Compensates for desktop reflection of sound waves.

Powerful Enough

The fine-tuned 3.5" mid-low drivers and 1" silk dome tweeters can deliver 18W*2 (RMS) total output power and 92.5dB SPL (peak @ 1 meter). They are suitable for near-field listening and also powerful enough to fill a medium room.

Rich Connectivity

Balanced TRS Input: Features low noise levels for signal transmission and is convenient for connection to your audio interface or audio mixer.

RCA and AUX Inputs: Available for simultaneous connection with multiple audio devices.

Headphone Output: Facilitates easy headphone connection.

Bluetooth V5.4

The Bluetooth V5.4 audio receiver supports seamless audio streaming with a stable connection. It also allows the simultaneous connection of two Bluetooth devices, making it easy to switch between audio sources.

Easy Control

EDIFIER ConneX App

Download the EDlFlER ConneX mobile app to enjoy additional features.

Playback control (Bluetooth input only)
Sound effects switch and customization
Room compensation settings
User manual and other settings

ข้อกำหนด

กำลังขับรวม (RMS):

18W + 18W

ตัวขับเสียง:

3.5" mid-low drivers, 1" silk dome tweeters

การตอบสนองความถี่:

52Hz - 40kHz

อัตราส่วนสัญญาณต่อเสียงรบกวน:

≥ 85dB (A)

อินพุตเสียง:

Balanced ¼-inch TRS, Unbalanced RCA, ⅛-inch stereo (3.5mm AUX), Bluetooth

ความไวของอินพุต:

TRS: 1228 ± 100mV (+4dBu)
RCA: 775 ± 50mV
AUX: 775 ± 50mV
Bluetooth: 800 ± 50mFFS

เวอร์ชันบลูทูธ:

V5.4

ตัวแปลงสัญญาณเสียง:

SBC

ตัวแปลงสัญญาณเสียง:

⅛-inch stereo

ขนาด (กว้าง x สูง x ลึก):

125.5mm x 220mm x 185mm (Active speaker)
125.5mm x 220mm x 176mm (Passive speaker)

น้ำหนักสุทธิ:

3.85kg

คำถามที่พบบ่อย
Playback Delay Issues:

1. To ensure lower latency during use, please upgrade your MR3 speaker to the latest firmware version. The latest firmware will help reduce audio transmission delays. You can download the Edifier ConneX app on your smartphone and update the MR3 firmware through the app.

2. To conserve energy, the MR3 will automatically enter network standby mode if there is no playback for 15 minutes and no operations are performed on either the speaker or the app. In this mode, delays may occur. To avoid this, try disabling the network standby mode.

Steps to Disable Network Standby Mode

A. Turn the speaker volume to the minimum level (i.e., volume set to 0).
B. Double-click the volume knob.
C. If the indicator light on the front of the speaker flashes once, it indicates that the network standby mode has been successfully disabled.

การสนับสนุน การสนับสนุนผลิตภัณฑ์และเทคนิค

User Manual
สมัครรับอีเมล
สมัครรับอีเมลและการสื่อสารจาก Edifier เพื่อเป็นคนแรกที่ได้รับข้อมูลพิเศษเกี่ยวกับโปรโมชั่น ผลิตภัณฑ์ใหม่ และอื่นๆ